Carrier Use For Older Baby: Backpack Position Assisted - Infantino Flip Front2Back Owners Manual Instructions

4.
While supporting the baby with one hand, close
the open leg hole by attaching the "hook &
loop" and fastening the buckle. You will hear a
"click" when buckle is secure. Adjust both leg
hole openings to snugly fit the baby's legs.
5.
Attach both head support buckles making
sure that the head support area remains
folded down. You will hear a "click" when
buckle is secure.
6.
To adjust how high the baby rides on your chest,
lift the baby slightly and pull the "shoulder strap
end" forward, first on one strap, then on the other.
When the baby is properly positioned, you should
be able to tilt your head forward and kiss the top
of your baby's head.
* The baby should NEVER be leaning forward in
the carrier.
* PLEASE NOTE: The arms of smaller babies should
be positioned below the "head support buckles."
Larger babies' arms should be above the buckles,
and rest comfortably over the folded down
head support.
8.
3

Carrier use for Older Baby: Backpack Position Assisted

* STOP! First time users, DO NOT attempt to use the carrier in the backpack position
without the assistance of a second person. We highly recommend always using
the assistance of a second person.
* IMPORTANT! The baby MUST be able to sit up on his or her own before
being worn in the backpack position.
1.
Adjust "lumbar belt" for backpack position by
feeding belt through lumbar channel. This will
allow "lumbar belt" to be centered on your
back.
2.
Place your arms through the straps like you are
putting on a jacket. The carrier should be hanging
down behind you.
3.
Connect the "chest/back strap" by fastening the
buckle. You will hear a 'click' when the buckle is
secure. Pull strap to tighten.
9.