Christie LX900 User Manual page 58

Setting
Enter a PIN code
Use the Point ed
the remote control to enter a number. Press the
Point 8 button to fix the number and move the red
frame pointer to the next box. The number changes
to "✳. " Repeat this step to complete entering a four-
digit number. After entering the four-digit number,
move the pointer to "Set. " Press the SELECT button
so that you can change the PIN code lock setting .
If you fixed an incorrect number, use the Point
button to move the pointer to the number you want
to correct, and then enter the correct number.
If you entered an incorrect PIN code, "PIN code" and
the number (✳✳✳✳) will turn red for a moment. Enter
the correct PIN code all over again.
Change the PIN Code Lock setting
Use the Point 7 8 button to select Off, On1, or On2 and then
move the pointer to "Quit" with the Point d button. Press the
SELECT button to close the dialog box.
Change the PIN Code
The PIN code can be changed to your desired four-digit
number. Press the Point d buttons to select "PIN code
change" and press the SELECT button. The New PIN code
input dialog box appears. Set a new PIN code.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE
DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE
NO . MEMO ON PAGE 80, AND KEEP IT SECURELy . IF
yOU FORGET yOUR PIN CODE, THE PROjECTOR CAN NO
LONGER BE STARTED .
Projector ID
This feature allows users to set serial communication
configuration (Projector ID) when several projectors are
connected via the RS-232C terminal (serial port) of the
projector.
Use the Point
7 8
Projector ID ... 1 - 999. (Factory default setting : Projector ID
●
54
buttons on the side control or on
buttons to adjust the Projector ID.
Enter a PIN code
7
Change the PIN code lock setting
Change the PIN code
1)
After a correct Logo PIN code is
entered, the following dialog box
appears.
Use the Point 7 8
buttons to switch
between the options.
LIT MAN USR LX900 and LW600
020-000053-02 Rev. 1 (06/08)