Remote Control Code - Christie LX900 User Manual

Part Names and Functions

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote
control codes prevents interference from other remote controls when several projectors or video equipment
next to each other are operated at the same time. Change the remote control code for the projector first before
changing that for the remote control. See "Remote control" in the Setting Menu on page 52.
1
Check the Reset Switch to "Use position" in the
compartment lid on the back of the remote control.
During holding down the MENU button, press the
2
IMAGE ADJ. button corresponding times to the
number of the remote control code for the projector.
Remote Control Code
Code 1
Code 2
Code 3
Code 4
Code 5
Code 6
Code 7
Code 8
16
Number of Times
Pressing IMAGE ADj .
button
1
2
3
4
5
6
7
8
Use position Reset position
Reset switch
MENU button
IMAGE ADj .
button
LIT MAN USR LX900 and LW600
020-000053-02 Rev. 1 (06/08)