Hitachi 42PD7200 User Manual page 35

OPERATING INSTRUCTIONS (continued)
SETUP MENU (TV mode) (continued)
Selected characters
Auto Tuning
Country
Search
Manual Tuning
Position
Search
(C--)
(S--)
(--MHz)
Descrambler
Name
Sound System
Colour System
Skip
NR
Decreasing the frequency
Fine Tuning
data for the main tuner
Sort
(A Line of position List)
Teletext Language
Auto Off
(Page1) (Page2) (Page3)
–
1 2 3 199 AV00
••••••
–
–
–
–
Off On
( :a letter)
L L' BG
DK I
Auto PAL SECAM
NTSC3.58 NTSC4.43
Off On
Off On
Increasing the frequency data
for the main tuner.
–
–
Off On
Select the country name by
button.
• If some required stations could not be preset in this auto tuning
function, select and preset the required station in the required
position by the manual tuning operation.
– Press the OK button and it starts the auto tuning.
Set the position number(0~199) or channel number(C✱✱, S✱✱) by
CHANNEL UP/DOWN buttons.
At first, select the channel entry method, entering a two digit chan-
– nel number(CH), entering a two digit S-band number or entering a
three digit frequency(MHz), by pressing the OK button.
Enter two digit number by pressing 0~9 NUMBER buttons. If the
–
number is normal, then it starts the channel search.
Enter two digit number by pressing 0~9 NUMBER buttons. If the
–
number is normal, then it starts the channel search.
Enter three digit number by pressing 0~9 NUMBER buttons. If the
–
number is normal, then it starts the channel search.
Set this to Off normally. If it is set to On, AV4 (Scart) terminal oper-
ates as TV signal output, and the screen changes to display AV4
(Scart) input signal automatically.
This is used to input the name of the TV station within 5 letters. After
fixing the cursor on the first digit, select a letter by
SELECT buttons and move to next digit by
Press the OK button again after finished.
• Selectable letters are "0"~"9", "A"~"Z", "+", "–", " "(blank),
","(comma) and "."(period) .
Select the sound system through the 5 different settings.
Select the colour system through the 5 different settings.
If this is set to On, that position will be skipped while selecting posi-
tions by PROGRAM UP/DOWN buttons.
This is automatically set to On for those non-broadcasting channels.
If this is set to On, it helps to reduce the noise interference visible on
the screen, especially in the weaker signal reception areas.
After completing the fine-tuning, press the RETURN button to exit
this mode.
• The variable range is -56 ~ +56.
Press OK button at the line that is required to change order, then the
characters will change to green. And move it up or down in the list
–
by pressing and
complete it. Press the RETURN button to exit.
Select the teletext language through the 4 settings.
– • Select West Europe when watch in Singapore, Australia, Malaysia,
and so on.
If this is set to On, the power will be turned off when there is no
transmission signal and no operation for about 10 minutes in the TV
mode.
Setup hint
SELECT buttons and press OK
and
ADJUST button.
SELECT buttons. And press OK button to
35