Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
Displaying MULTI PICTURE (continued)
Activating the Split mode from the video input screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
• The speaker icon can be shifted left and right by pressing the
video will be output from the side on which the speaker icon is located.
• The same video input mode cannot be selected for both screens at the same time.
• Pressing the MULTI PICTURE button again or the RETURN button will cancel the 2 pictures display.
• Refer to the table for 2 pictures (Split) mode.
Activating the MULTI PICTURE mode from the RGB input screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
• This mode can be available from RGB1(DVI-PC) and RGB2(RGB) input.
• The speaker icon can be shifted left and right by pressing the
video will be output from the side on which the speaker icon is located.
• The sub-screen position can be selected up and down by pressing
• The sub-screen can be selected with the AV1 AV6, TV channel buttons from the status that the speaker
icon appears on the left side of AV✱ etc. as shown in the diagram to the right.
• Pressing the MULTI PICTURE button again or the RETURN button will cancel the 2 pictures display.
• "Frequency Mode" in the Setup Menu should be set to Movie when sub-screen is the component signal of
1080i/50 or 1080i/60.
NOTE
• Even if the input of the horizontal / vertical synchronizing signal (or video signal) stops in the multi picture display, the mode will not change
to power save mode.
• Please be careful since image retention will occur if display is left in a multi picture display state for a long period of time.
2 Pictures (Split)
Input terminal
Sub
Main
TV
AV1
PAL, SECAM
AV5
NTSC3.58/4.43
576i, 576p
AV1
480i, 480p
AV2
1080i/50
AV6
1080i/60
720p/60
RGB1
STB
RGB2
Component
4 Pictures
Input terminal
Sub
Main
TV
AV1
PAL, SECAM
AV5
NTSC3.58/4.43
576i, 576p
AV1
480i, 480p
AV2
1080i/50
AV6
1080i/60
720p/60
STB
RGB1
Component
RGB2
28
AV1 AV5
PAL
NTSC3.58
576i
TV
SECAM
NTSC4.43
576p
AV1 AV5
PAL
NTSC3.58
576i
TV
SECAM
NTSC4.43
576p
and
SELECT buttons; the audio of the
and
SELECT buttons; the audio of the
and
SELECT buttons.
AV1: Displays the VIDEO input signal of the sub-screen.
AV1, AV2, AV6
480i
1080i/50 1080i/60 720p/60 STB
480p
Teletext is available only for TV
AV1, AV2, AV6
480i
1080i/50 1080i/60 720p/60 STB
480p
RGB1
RGB2
TELE
TEXT
Component
(
: Available)
RGB1
RGB2
TELE
TEXT
Component
(
: Available)
AV1
AV2
RGB2
AV1
(Sub-
screen)
Main
Sub
Main
Sub 1
Sub 2
Sub 3
Hide quick links:
Advertisement
Table of Contents
