Arming And Disarming The System; Stay Arm (Arming The Perimeter); Silent Exit Delay - DSC PTK5507 User Manual

NOTE: These events are recorded in the log.
Figure 3 - Controls & Indicators
Stay Arm
Global Arm
Zone Status
Photo Frame

Arming and Disarming the System

Stay Arm (Arming the Perimeter)

Ask your alarm company if this function is available on your system.
Stay arming bypasses the interior protection (i.e., motion sensors) and arms the perimeter of the system
(i.e., doors and windows). Close all sensors (i.e., stop motion and close doors). The Ready ( ) indica-
tor should be on. Press the Stay Arm button and/or enter your Access Code and do not leave the prem-
ises (if your installer has programmed this button). During exit delay, the Armed ( ) and Ready ( )
indicators turn on to visually indicate that the system is arming.
When the exit delay expires, the Ready LED turns off , the Armed LED remains on and the keypad
stops sounding to indicate that the alarm system is armed.
NOTE: For SIA FAR listed panels, the Stay Arming exit delay will be twice as long as the Away
Arming exit delay.

Silent Exit Delay

If the system is armed using the Stay Arm button or using the "No Entry" Arming method
([,][9][access code]), the audible progress annunciation (keypad buzzer) is silenced and the exit time
doubled for that exit period only (CP-01 versions only).
NOTE: For non CP-01 versions, Standard exit time is used.
When Stay Arm is selected from the Home screen:
• The display indicates "Exit Delay in Progress," and the pre-programmed exit delay begins.
• The Armed LED Indicator turns on.
System Status
Ready Armed Home/
LED Reset
LED
3
Partition Status
Away Arm
AC
Trouble
SD card slot
LED
LED
Time/Date
Trouble Menu
Command Output
Keypad/
Security Functions
Emergency Key