Troubles - DSC PTK5507 User Manual

Troubles

When a trouble condition is detected, the Trouble (
will beep every 10 seconds. Press the ( ) key to silence the beeps. Press ( ) to view the trouble con-
dition. The Trouble ( ) or System indicator will flash. The corresponding trouble will light up.
Troubles
Service Required
(Press for more
details)
AC Loss
Phone Trouble
Communication
Failure
Zone Fault
Zone Tamper
Wireless Low Bat-
tery
Loss of Clock
Comments
(1) Low Battery (2) Bell Circuit (3) General System
Trouble (4) General System Tamper (5) General Sys-
tem Supervision (6) RF Jam Detected (7) PC5204
Low Battery (8) PC5204 AC Loss
If the building and/or neighborhood has lost elec-
trical power, the system will continue to operate
on battery for several hours.
The system has detected that the telephone line is
disconnected.
The system attempted to communicate with the
monitoring station, but failed. This may be due to
Telephone Line Fault.
The system is experiencing difficulties with one or
more sensors on the system. Press to display the
zone.
The system has detected a tamper condition with
one or more sensors on the system. Press to display
the zone.
The system has detected a low battery condition
with one or more modules/sensors on the system.
Press to display the zone, keypad, wireless key(s)
and RF Delinquency low battery conditions. Press
again to see zone troubles.
If complete power was lost (AC and Battery), the
time and date will need to be reprogrammed.
) or System indicator will turn on, and the keypad
10
Action
Call for service
Call for service
Call for service
Call for service
Call for service
Call for service
Call for service
Reprogram Time &
Date