Huffy 6V Owner's Manual page 22

Troubleshooting Guide - continued
Problem
Vehicle will not run
when foot pedal is
pressed and shift
lever is in the for-
ward or backward
position
Diffi cult shifting
from forward to
reverse or vice-
versa
Loud grinding or
clicking noises
coming from motor
or gear box
6V Battery will not
recharge
Charger feels
warm when re-
charging
22
Possible Cause
Poor contact of wires or
connectors
"Dead Spot" on motor
Attempting to shift while
the vehicle is in motion
Motor or gears are
damaged
Drive Wheel is partially
engaged
Battery connector or
adapter connector is
loose
Charger not plugged in
Charger is not working
Battery is dead
This is normal and not a
cause for concern
Solution
Check that the battery connectors
are fi rmly plugged into each other. If
wires are loose around the motor call
Customer Service.
A dead spot means the electric
power is not being delivered to the
terminal connection and the vehicle
needs repair. Call Customer Service.
Completely stop the vehicle and shift
(see Use: Manual Operation)
Call Customer Service.
Check drive wheel - to motor en-
gagement.
Check that the battery connectors
are fi rmly plugged into each other.
Check that the battery charger is
plugged into a working wall outlet.
Replace battery.
If excessively hot, unplug and re-
place.