How To Set The Exstreamer To Stream Music From A Web Server; How To Set The Exstreamer To Be A Streaming Puller; How To Set The Exstreamer To Be A Streaming Receiver - BARIX EXSTREAMER WIRELESS User Manual

8.4 How to set the Exstreamer to
stream music from a web server
For use with standard web servers
STEP 1
Open your Web Browser
STEP 2
Enter the IP address of the Exstreamer and press Enter.
Example: 192.168.0.12
STEP 3
Click on the Config link.
STEP 4
Click on the SERVER tab in the SETTINGS menu
STEP 5
Choose "2 Web server" in the Mode field.
STEP 6
In the Server IP Address field enter in the IP address of the
target web server the Exstreamer should stream from.
STEP 7
In the Server Port field you have to enter the port number
of which your web server is communicating (standard web
servers work on port 80). Example: 80
STEP 8
In the Server Path field you have to enter the path where
your playlists are stored on the web server. Please note
that you have to put a "/" in front and at the end of the
path. A single "/" in the field indicates the root directory of
the Web server. Example: /Music/
STEP 9
In the Playlist List Path field you have to enter the path
where your list of playlists is stored on the web server.
Example: /Music/playlist.txt
STEP 9
Hit the Apply button to save the changes. The Exstreamer
will reboot.
STEP 10
After the reboot click on the HOME icon to get to the
main page. You should see now your playlists served by the
web server. Clicking on a playlist will start the music.
8.5 How to set the Exstreamer to be a
streaming puller
For use with standard MP3 jukeboxes
STEP 1
Open your Web Browser
STEP 2
Enter the IP address of the Exstreamer and press Enter.
Example: 192.168.0.12
Exstreamer User Manual Version 1.7
STEP 3
Click on the Config link.
STEP 4
Click on the SERVER tab in the SETTINGS menu
STEP 5
Choose "3 Streaming Puller" in the Mode field.
STEP 6
In the Server IP Address field enter in the IP address of the
target jukebox the Exstreamer should stream from.
STEP 7
In the Server Port field enter in the port number required
by the jukebox (check the jukebox documentation)
STEP 8
In the Server Path field you have to enter a "/".
Some Jukeboxes allow you to distinguish between different
server Paths: Example: /music2
STEP 9
Hit the Apply button to save the changes. The Exstreamer
will reboot.
STEP 10
After the reboot the Exstreamer will start pulling music
from your Jukebox.
8.6 How to set the Exstreamer to be a
streaming receiver
For use with applications sending a stream.
STEP 1
Open your Web Browser
STEP 2
Enter the IP address of the Exstreamer and press Enter.
Example: 192.168.0.12
STEP 3
Click on the Config link.
STEP 4
Click on the SERVER tab in the SETTINGS menu
STEP 5
Choose "4 Streaming receiver" in the Mode field.
STEP 6
Hit the Apply button to save the changes. The Exstreamer
will reboot.
STEP 7
After the reboot the Exstreamer will wait for a stream on
the selected TCP and/or UDP Streaming Listen Port.