FEATURE SUMMARY
SYSTEM ANNOUNCES:
"Change remote access code" Set the remote access code you
50*
"Change clock"
Monday, 12:00 AM*
"Change message alert"
Off
*
On
"Change announce only"
Off
*
On
"Change number of rings"
2
4
*
6
"Change call screening"
On
*
Off
NOTE:
Exit Feature Setup at any time by pressing a MAILBOX/STOP
button.
Default settings indicated by
DESCRIPTION/DIRECTIONS:
will use to access features and
functions of the answering system
from a touch tone phone.
Set the day and time. After you
set the day, repeat Steps 3 and 4 in
"Answering System Feature Setup" on
page 43 to set the hour and
minutes.
When Message Alert is turned on,
the base beeps once every 10
seconds when new messages have
been received.
When you turn Announce Only
on, callers hear your
announcement but cannot leave a
message.
Choose how many times the
phone will ring before the system
answers a call. With Toll Saver
active, the system answers after Toll
Saver two rings when you have new
messages and after four rings when
you have no new messages.
When you turn Call Screening
off, you will not hear incoming
messages as the caller leaves them.
*
.
45