AMT Datasouth Accel-7350 User Manual page 31

9. EJECT/LOAD
●If the EJECT/LOAD key is pressed when fanfold paper is loaded, the
paper is fed back to the parking position. When it is pressed when a cut
sheet paper is loaded, the paper is ejected.
●When the EJECT/LOAD key is pressed when fanfold paper is at the
parking position, the paper is loaded to the TOF position.
●When the EJECT/LOAD key is pressed with no paper in the manual
mode, AUTO SKEW mode is turned on and off. When it is pressed with
paper loaded in the manual mode, the printer ejects the paper.
●When the EJECT/LOAD key is pressed with no paper in the CSF
mode,the printer loads paper. When it is pressed with paper loaded in the
CSFmode, the printer ejects the paper.
10. LF
Press the LF/FF key to line feed in the forward direction at a
pitch of 1/6 inch.
11. MICRO LF (ALT + LF keys)
Press the MICRO LF key to line feed in the forward direction at a pitch of
1/360 inch. Use this key to adjust the paper position.
12. RLF
Press the RLF key to line feed in the reverse direction at a pitch of
1/6 inch. Keep the key depressed for continuous reverse line
feeding.
13. MICRO RLF (ALT + RLF keys)
Press the MICRO RLF key to line feed in the reverse direction
at a pitch of 1/360 inch. Use this key to adjust the paper
position.
Page 30 of 46
Chapter 2