AMT Datasouth Accel-7350 User Manual page 30

6. ENTER
The setting are saved by pressing the ENTER key.
7. ALT
The following functions are executed by pressing the
corresponding key while you press the ALT key.
8. TEAR OFF
Press the TEAR OFF key, and the printer automatically
feeds the perforation of the paper to the paper cutter
position (for fanfold paper only). If the perforation is not
adjusted to the cutter position, correct the position with the
MICRO LF or MICRO RLF key. The correct position is
saved in memory, and the perforation is fed automatically to
the paper cutter position at next time.
Page 29 of 46
FF→ Form Feed
MICRO LF → Micro Line Feed
MICRO RLF → Micro Reverse Line Feed
MENU → Setup Menu
RESET → Resets the printer
Chapter 2