Installing/Removing The Processor; Technical Data; Graphics Controller - Fujitsu D2831 Short Description

Brief description of mainboard

Graphics controller

• Intel GMA 4500
Typical resolution (colour depth up to 32 bits/pixel)
1024 x 768 (recommended)
1280 x 1024 (recommended)
1600 x 1200 (recommended)
1440 x 900 Widescreen TFT (VGA/DVI)
1680 x 1050 Widescreen TFT (VGA/DVI)
1920 x 1200 Widescreen TFT (VGA/DVI)
Other resolutions are possible depending on the monitor.

Installing/removing the processor

Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.

Technical data

• Base LGA775, max. 95W
• Intel® Core 2 Quad Q9xxx / Q8xx processors, LGA775 with 1333/1066 MHz FSB
TM
• Intel® Core 2 DUO E8xxx / E6xxx processors, LGA775 with 1333/1066 MHz FSB
TM
• Intel® Core 2 DUO E7xxx / E4xxx processors, LGA775 with 1066/800 MHz FSB
TM
• Intel® Pentium® Dual Core E2xxx processors, LGA775 with 800 MHz FSB
• Intel® Celeron® Dual Core E1xxx processors, LGA775 with 800 MHz FSB
• Intel® Celeron® 4xx processors, LGA775 with 800 MHz FSB
• A current list of the processors supported by this mainboard is available on the
Internet at: "http://ts.fujitsu.com/mainboards".
Never touch the underside of the processor. Even minor soiling such as grease
from the skin can impair the processor's operation or destroy the processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent, on no account insert the processor as it
may be damaged by doing so. Please contact the responsible vendor.
2 - English A26361-D2831-Z212-1-8N19, edition 1