Advertisement

Quick Links

Index
deSCRIPTIOn OF THe APPLIAnCe ............................... 7
PRePARATIOnS FOR USe .......................................... 8
What water to use .......................................................................... 8
Filling the tank ................................................................................ 8
Adjusting plate temperature. ........................................................ 9
STeAM IROnInG .................................................... 9
dRY IROnInG .......................................................10
VeRTICAL IROnInG ................................................10
TURBO FUnCTIOn .................................................11
SPRAY BUTTOn ....................................................11
nO-dRIP SYSTeM .................................................11
AUTO-OFF ..........................................................11
AFTeR IROnInG ....................................................12
Cleaning and maintenance .......................................................... 12
Limescale prevention and SELF CLEAN ....................................... 12
LIMITed WARRAnTY ..............................................13
4

Advertisement

Table of Contents
loading

Summary of Contents for DeLonghi FXG 175 AT

  • Page 1: Table Of Contents

    Index deSCRIPTIOn OF THe APPLIAnCe ....... 7 USInG THe APPLIAnCe FOR THe FIRST TIMe ....8 PRePARATIOnS FOR USe .......... 8 What water to use ................8 Filling the tank ................8 Adjusting plate temperature............9 STeAM IROnInG ............ 9 dRY IROnInG ............10 VeRTICAL IROnInG ..........10 TURBO FUnCTIOn ..........11...
  • Page 2 IMPORTAnT SAFeTY InSTRUCTIOnS When using electrical appliances, basic safety precautions should always be followed, including the following: ReAd ALL InSTRUCTIOnS BeFORe USInG 1. Use appliance only for it’s intended use. To protect against a risk of electric shock, do not immerse the appliance in water or other liquids.
  • Page 3 9. The use of an accessory attachment is not recommended by Dè Longhi and may result in fire, electric shock or personal injury. SPeCIAL InSTRUCTIOn 1. To avoid a circuit overload, do not operate a high wattage appliance on the same circuit. 2.
  • Page 4: Description Of The Appliance

    without supervision. • Never leave the appliance plugged in as it could be a safety hazard. • Before cleaning or servicing, disconnect the appliance by unplugging it from the outlet. • Never fill the appliance under running water. • Do not direct the steam jet toward people, animals, or iron clothes when they are being worn as this could be dangerous. • After ironing, allow the iron to cool before putting away.
  • Page 5: Using The Appliance For The First Time

    H. Thermostat knob I. “Self Clean” button L. “Turbo” button M. Water measure USInG THe APPLIAnCe FOR THe FIRST TIMe • The first time you use the iron, remove the plate protection (if present). • When used for the first time, the appliance may give off smoke and an odor for several minutes. This is caused by heating and subsequent drying of the sealers used in assembling the appliance.
  • Page 6: Adjusting Plate Temperature

    Adjusting plate temperature. Please note: On the back of the iron there is a useful guide giving information on the temperature to set according to the garment being ironed: • Plug the iron into the outlet. (Models with auto-off only: the light F comes on to indicate that the appliance is connected to an electricity supply.) • The “steam ready” light G comes on.
  • Page 7: Dry Ironing

    Steam stops when the iron is placed upright on the rear rest (the recommended position during pauses in ironing). dRY IROnInG • Set plate temperature as described above. • Move the steam regulator to the position (“dry”). • Wait for the “steam ready” light G to go off. The iron is ready to use. If the fabric to be ironed is slightly damp or you iron fast, you can use a higher temperature.
  • Page 8: Turbo Function

    TURBO FUnCTIOn Press this button to obtain a powerful jet of steam, useful to eliminate creases. • Set plate temperature to MAx. • Move the steam regulator to the steam position. • Wait for the “steam ready” light G to go off. • Press and release the Turbo button (L). To use the turbo function correctly, wait a few seconds between one burst of steam and the next.
  • Page 9: After Ironing

    device trips after 8 minutes. The light (F) flashes to indicate auto-off. To begin ironing again, shake the iron slightly forwards until the light (F) comes on steadily. AFTeR IROnInG To extend the working life of the iron, whenever you finish ironing, you are recommended to empty the tank as follows: • Unplug the iron from the outlet.
  • Page 10: Limited Warranty

    However, if the amount of stream drops during use, this could be caused by a build-up of limescale. To remove, proceed as follows: • Fill the tank. • Plug the appliance into the outlet and place the thermostat in the MAX position. • When the iron has reached the required temperature (light off), unplug the appliance. • Place over a sink and in a horizontal position. • Press the SELF CLEAN I button and hold it down. • Shake the appliance gently to drain the water in the tank through the plate, taking the impurities with it.
  • Page 11 For all accessories, spare parts or replacement parts, please contact our parts division at 1-800-865-6330. Residents of Canada: Please contact our toll free hotline at 1-888-335- 6644 or log onto our website at www.delonghi.com. Residents of Mexico: Please refer to the Limited Warranty statement for Mexico.

Table of Contents