Reboot; Configuration Management - Cisco Small Business WAP44 Administration Manual

Configuring the Cisco WAP4410N Wireless-N Access Point
Administration
STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
d. In the File field, enter the location of the firmware upgrade file or click the
Browse button to locate the file.
e.
Click Upgrade and follow the on-screen instructions
Re-enter all of your custom configuration settings.

Reboot

The Administration > Reboot page allows you to reboot the access point. To
reboot the access point, follow these steps:
Click Administration > Reboot.
In the Device Reboot field, click Yes.
Click Save.

Configuration Management

The Administration > Configuration Management page allows you to create a
backup configuration file or upload a configuration file to the access point. To
manage the configuration for the access point, follow these steps:
Click Administration > Configuration Management.
To create a backup configuration file, click Save Configuration to File and follow
the on-screen instructions.
To restore the configuration of your access point:
a. Make sure that the configuration file for the access point is on your computer.
b. In the Restore Configuration field, enter the location of the configuration file or
click Browse and locate the configuration file.
c. Click Load.
.
6
49