Using A Standard Switch Or Router - Cisco Small Business WAP44 Administration Manual

Connecting the Cisco WAP4410N Access Point
Connecting the Cisco WAP4410N Access Point to the Network
STEP 1
STEP 2
STEP 3
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
The lights on the front panel light up as soon as the Cisco WAP4410N Access
Point powers on.

Using a Standard Switch or Router

To connect the Cisco WAP4410N to your network using a standard switch or
router, follow these steps.
Use the supplied Ethernet cable to connect the Ethernet port of the access point
to an Ethernet port on the switch.
Connect the included power adapter to the Power port of the Cisco WAP4410N
Access Point.
Plug the power adapter into an electrical outlet.
The lights on the front panel light up as soon as the Cisco WAP4410N Access
Point powers on.
4
18