Setting Up; Cautions When Setting Up The Interface Box; Mounting On The Rack - Panasonic ET-YFB100G Operating Instructions Manual

Setting up

Cautions when setting up the interface box

▶
z When mounting the interface box to a rack or a table underside, use the supplied rack/table underside
mounting bracket or the rack mounting bracket.
▶
z Use a torque screwdriver or torque wrench to tighten bolts to their specified tightening torques. Do not
use tools such as electric screwdrivers or impact screwdrivers. Tightening screws with over their specified
tightening torques will damage mount screw holes, failing to mount the interface box using brackets.
Right side
Left side

Mounting on the rack

1) Attach the supplied rack mounting bracket.
▶
z Fix the rack mounting bracket to the rack mount screw holes on both sides of the interface box with
supplied flat-head Phillips screws (3 pcs). Securely tighten the screws.
Rack mount
screw hole
2) Attach the supplied rack/table underside mounting bracket.
▶
z Fix the rack mounting bracket to the rack mount screw holes on the both sides of the interface box with
supplied flat-head Phillips screws (3 pcs).
Rack mounting bracket
Supplied screws: Flat-head Phillips screw (M3)
Torque: 0.8 ± 0.2 N·m
Table underside mount screw hole
Rack mount screw hole
Rack/table underside mounting bracket
Setting up
ENGLISH - 15