Switching On/Off The Interface Box; Connecting The Ac Adaptor - Panasonic ET-YFB100G Operating Instructions Manual

Switching on/off the interface box

Connecting the AC adaptor

Confirm that the <POWER> button of the interface box is off, and then connect the power cord and the AC
adaptor.
For details of the AC adaptor and the power cord handling, refer to "Read this first!"(
■ To attach the power cord
1) Fully and securely insert the power cord to the AC adaptor. Then, securely insert the
AC adaptor plug to the <DC IN> terminal at the connecting terminals.
2) Fix the supplied mounting bracket for securing AC adaptor to the interface box.
(i) Hook the nails (a) of the mounting bracket for securing AC adaptor to two holes at the bottom surface
of the interface box.
• Turn the AC adaptor plug vertically or horizontally according to the condition.
(ii) Attach the mounting bracket as to cover the AC adaptor plug and fix with the supplied mounting bracket
screw for securing AC adaptor. Securely tighten the screws.
Connecting the plug horizontally
(i)
Connecting the plug vertically
(i)
Attention
z Do not attach the power cord and the AC adaptor with the front side of the interface box down.
z Be sure to fix the cables connected to the interface box and the supplied AC adaptor nearby such as the legs
of the desk to avoid the cable and AC adaptor weights directly applied to the interface box.
Switching on/off the interface box
(ii)
(a)
(ii)
(a)
pages 3 to 8).

ENGLISH - 23