Setting The Clock - Panasonic RR-XS410 Operating Instructions Manual

Setting the clock

The clock has not been set at the time of purchase.
The clock is used as a file name (➜ page 61) or to preserve recording date and time
information. Set the correct date and time.
• Turn the power on. (➜ page 9)
1
Press [MENU].
2
Press +, – to select "COMMON
MENU" and press [q OK] to enter.
3
Press +, – to select "DATE & TIME"
and press [q OK] to enter.
4 Press +, – to set the
year and press i.
The above illustration is a display example.
5
Press +, – to set the month and
press i.
6
Press +, – to set the date and press
i.
* The clock operates with the monthly loss/gain of approx. 60 seconds at normal temperature.
*
The clock setting will be lost if the battery is removed or completely exhausted.
10
10
7
Press +, – to set the clock indication
method and press i.
" " and " / " are displayed for the
24H AM PM
24-hour display and the 12-hour display
respectively.
8
Press +, – to set the hour and press
i.
9
Press +, – to set the minute.
To change the setting, press u, i to
move between the items, and then press
+, – again to make the setting.
10
Press [q OK] to enter.
The date and time are set and the clock
starts to operate.
To exit the setting screen, press
[F2 (CLOSE)].
F1 F2
MENU