Table of Contents
Advertisement
Using Your Coil Element Cooking
Surface (select models)
It is normal for some parts of the cooktop, especially
Coil
Elements
areas surrounding
the surface elements,
to become
Tile coil elements of your range are self-cleaning.
Do
warm or hot during
surface
cooking
operations,
not immerse the elements in water.
There{ore, do not toueh or let heat-sensitive materials
such as plastics touch the cooktop until it has had time
To remove: Raise the element when cool and carefully
to cool
pull out and awW from the receptacle.
To replace:
Insert the terminals on the element into
Lift-up
Cooktop
the receptacle and guide the element into place until it
Your range features an _pswept eooktop that can be
sits level on the drip bowl.
lifted up for convenient access to the area under the
cooktnp. The top is hinged and can be raised but not
Drip
Bowls
removed.
The drip bowls, located under each surface element, are
To llft eooktop: When cool, grasp tim front edge of the
designed
to catch boilovers.
They must always be
eooktop and gently lift up until the two automatic prop
used--absence
of these bowls during cooking may
rods at the front of the cooktop snap into place,
damage wiring or other parts underneath
the cooktop.
To lower eooktop: Hold the front edge of the eooktop
Clean the drip bowls frequently. See cleaning section,
and carefnlly push back on each prop rod to release the
pages 11-14.
notched support. Then gently lower the top into place.
The prop rods will slide into the range frame.
PAGE 8
Advertisement
Table of Contents
