Maytag CRE9590C Use & Care Manual page 26

Fault Codes
Your range is equipped with an electronic control
During Normal Oven Cooking
featuring built-in, self-diagnostic software. This If a fault code appears in the display, press the
software continuously monitors the control to CANCEL pad and reprogram the cooking
ensure safe and proper operation, ff the software
operation. K the fault code reappears, call a
should detect a questionable situation, a FAULT qualified service technician. Do not use the oven
CODE (F plus a number) will appear in the display until the control has been serviced. The cooktop
and continuous beeps will sound, can be used.
During a Self-Clean Cycle
_[ Ii -- J If the oven is heavily soiled, excessive smoke and
-- - -- flaring may result in a fault code. If this occurs,
__ press the CANCEL pad and allow the oven to cool
for an hour. Then, reprogram the oven for the clean
cycle.
A fault code indicates that there may be a If the fault code reappears in the display, call a
functional error. As a safety precaution, the control qualified service technician. Do not use the oven
will automatically cancel the program. Follow the until the control has been serviced. The cooktop
procedures described below to check the range, can be used.
PAGE 25