Setting The Portion Size; Setting The Portion Size When Making A Drink - Miele CVA 6401 Operating And Installation Instructions

The flavour of the coffee produced
depends on the type of coffee, how
finely the beans are ground and the
quantity of water used.
You can programme the amount of
water used for espresso, coffee or hot
water to suit the size of your cups and
the type of coffee you are using.
For coffee made with milk, in addition to
programming the portion size of coffee
you can programme the amount of milk
and milk froth used. You can also
programme the portion size for hot milk
and froth.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum amount possible for that
type of drink will then be saved.
The changed portion size is always
saved in the current profile. The
name of the current profile is shown
in the top left of the display.
There are two ways of programming the
portion size. Either:
– with the drinks sensors while making
a coffee, or
– by selecting "Portion size" in the
"Parameters" , menu.
Tip: You can cancel the portion size
programming as long as "Stop" is
visible in the display.
If there is insufficient water in the
water container, the process for
programming the amount will be
stopped and the amount will not be
saved.

Setting the portion size

Setting the portion size when
making a drink
Setting the portion size for
Espresso ., Coffee / and Long
coffee /
^ Place the desired cup under the
central spout.
^ Touch ., / or / until "Change"
appears in the display.
The required drink will be prepared and
"Save" will appear in the display.
^ Touch the OK sensor when the cup
has been filled to the level you want.
The portion size you have saved will
now be dispensed every time that
particular drink is selected.
33