Accessories Installation; Chassis Fan Installation - POPCORN HOUR C-200 User Manual

8.3 Accessories Installation

8.3.1 Chassis Fan Installation

Your NMT allows the installation of an internal chassis fan to assist with lowering the operating
temperature of your unit. Follow the steps below to install a 60mm computer fan into the NMT.
1. Remove the top cover of your NMT and locate the chassis fan mount.
2. Align the fan to expel warm air from the inside of your NMT.
3. Secure the fan to the NMT using four screws and plug in the power supply of the chassis fan to
the Molex connector (labeled: BACK FAN) on the mainboard.
4. Select the appropriate jumper configuration to control the fan voltage settings.
Note: The chassis fan is not included with your NMT. Kindly contact your nearest
112
IT store to purchase a chassis fan.
// Popcorn Hour C-200