// Popcorn Hour C-200
1. Pull the latch on the tray door to open the HDD tray.
2. Slot the 3.5" HDD into the tray (SATA connections facing inwards with the HDD label facing
upwards).
3. Close the door to secure the HDD into the tray. Your 3.5" HDD is now installed in the NMT.
5.1.2 HDD (2.5") Installation
A compatible 2.5" SATA HDD can be installed into your NMT with a few simple steps. Follow the
steps below to install a 2.5" HDD into your NMT.
Warning: Ensure that the power supply cable has been disconnected from your NMT
before attempting to dismantle the unit.
45