Setup Procedure(Vga); Edid Key-In Procedure(Vga-1 & Vga-2) - Optoma EX612 Service Manual

6-3 Setup Procedure (VGA)
1. Connect all ports
(1) Connect P1 of fixture with COM Port of
PC/Laptop by RS232 Cable.
(2) Connect P3 of fixture with VGA-1 Port
of projector by VGA Cable 1.
(3) Connect P4 of fixture with VGA-2 Port
of projector by VGA Cable 2.
(4) Plug Power Adapter to JP1 of fixture.
(5) Power on fixture.
(6) Plug Power Cord to projector.
Note: -You must confirm that the JP3 is closed
in all procedure.
6-4 EDID Key-In Procedure
(VGA-1 & VGA-2)
1. Execute EDID Program
- Double click "EDID" to execute EDID
program.
RS232 Cable
P3
P4
VGA Cable 1
VGA-1 Port
VGA-2 Port
Power Port
EX612/EX615 Confidential
Adapter
P1
JP1
JP3
VGA Cable 2
6-3