Equipment Needed & Product Overview - Optoma EX612 Service Manual

Chapter 2
Disassembly Process
2-1 Equipment Needed & Product Overview
1. Screw Bit (+): 105
2. Screw Bit (+): 107
3. Screw Bit (-): 107
4. Hex Sleeves 5 mm
5. Tweezers
6. Projector
* Before you start: This process is protective level II. Operators should wear electrostatic chains.
* Note: - If you need to replace the Main Board, you have to record the Lamp Usage Hour.
- The disassembly process for EX612/EX615 is the same,we take EX615 as an example
here.
EX612/EX615 Confidential
2-1