6-3 Setup Procedure (VGA)
1. Connect all ports
(1) Connect P1 of fixture with COM Port of
PC/Laptop by RS232 Cable.
(2) Connect P3 of fixture with VGA-IN Port
of projector by VGA Cable.
(3) Plug Power Adapter to JP1 of fixture.
(5) Power on fixture.
(6) Plug Power Cord to projector.
Note: -You must confirm that the JP3 is closed in
all procedure.
6-4 EDID Key-In Procedure
1. Execute EDID Program
- Double click "EDID" to execute EDID
program.
RS232 Cable
P3
VGA Cable
Power Port
ES523ST/EW533ST
Adapter
JP1
P1
JP3
VGA-IN Port
Confidential
6-3