Panasonic CQ-VD7001W Operating Instructions Manual page 25

Trouble Shooting
MP3/WMA
The disc has unplayable formatted data.
No playback or disc
aRefer to the description about MP3/WMA for playable sound data except
ejected
CD-DA (i.e. music CD).
The playability of some CD-R/RWs may depend on the combination of media,
The CD-R/RWs that are
recording software and recorder to be used even if these CD-R/RWs are
playable on other
playable on other devices such as a PC.
devices are not
aMake CD-R/RWs in a different combination of media, recording software
playable on this unit.
and recorder after referring to the description about MP3/WMA.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc. For MP3/WMA, refer
Sound skipping or
to the description about MP3/WMA.
noise
Playing VBR (Variable Bit Rate) files may cause sound skipping.
aPlay Non-VBR files.
Note:
¡Refer to "Notes on MP3/WMA"
(a page 24)
DVD
¡It is not possible to switch if the disc does not have multiple audio lan-
Cannot switch the audio guages/subtitle languages/angles recorded on it. (Refer to the guide provid-
language/subtitle ed with your disc.)
language/angle. ¡Some discs permit switching through a menu screen.
¡Sometimes, switching angles is possible only with certain scenes.
The audio/subtitle
If audio or subtitles in that language are not recorded on the disc, the audio or
language selected in
subtitles do not switch to that language. (Some discs permit switching
the DVD settings is not
through a menu screen. Refer to the guide provided with your disc.)
used.
The disc is still unfinalized.
aFinalize the disc.
A DVD-R or DVD-RW is
not playable.
Refer to "Before Disc Playback"
(a
Car Navigation, VCR, Camcorder, Rear View Camera, Rear Monitor
The connection of a car navigation system is not correct.
The picture from a car
aConnect it correctly.
navigation system is
Input setting of a car navigation system is not correct.
not displayed.
aCorrect the input setting.
The picture from a VCR or a A VCR or Camcorder is not connected correctly.
aConnect a VCR or Camcorder correctly.
camcorder is not displayed.
Rear view camera is not connected correctly.
The picture from a rear
aConnect a rear view camera correctly.
view camera is not dis-
Input setting of camera is not correct.
played.
aCorrect the input setting.
The picture or the
AUTO
sound of the rear moni-
aSelect
tor is not switchable.
50
CQ-VD7001W
(continued)
(a page 18) or "Notes on Discs"
page 54) for other cases.
(AUTO) is not selected as the rear monitor setting.
(AUTO) for the setting.
AUTO
Display Settings
(AUTO) dimmer is selected.
AUTO
The brightness of the
aSelect one of the dimmer levels from among 1 to 4 to make the dimmer
screen is not stable.
adjustment become free from light intensity.
The picture is dark.
The picture is whitish.
The screen is not adjusted properly.
Something is wrong
aMake every adjustment of the screen.
with the picture. The
picture is light in color.
The display does not The monitor stops on the way to the home position.
go back into the unit. a Press [O/C] (OPEN/CLOSE).
Red, blue, or green
This is a characteristic of liquid crystal panels and is not a problem.
spots appears.
Remote Control Unit
The battery is inserted in the wrong direction. A wrong battery is inserted.
aInsert a correct battery in the correct direction.
The battery is weak.
aReplace the battery with new one.
No response to press-
The aiming direction of the remote control unit is wrong.
ing buttons
aAim the remote control unit at the sensor of the unit and press buttons.
The sensor is exposed to direct sunlight. (The remote control unit may not be
operable when the sensor is exposed to direct sunlight. In such a case, the
system is not faulty.)
aBlock off sunlight to the sensor.
Sound Settings
No sound from left,
Cables are not correctly connected.
right, front, or rear
aConnect the cables correctly.
speaker.
Left and right sounds The speaker leads are connected in reverse between right and left.
are reversed. aConnect the speaker wires to the correct one.
No sound on the The speaker setting is
speaker. aSet it correctly.
Playing back a disc having a subwoofer channel
¡Subwoofer is set to
aSet subwoofer to
¡Down mix
No sound from the
aNo technical trouble. Cancel the down mix.
subwoofer
¡Private mode is set to
aSet private mode to
¡Pro Logic is set to
aSet Pro Logic to
NO (no) or NONE (none) .
(no) in the speaker setting.
NO
(yes).
YES
(on).
ON
(off).
OFF
ON (on).
(off).
OFF
CQ-VD7001W
51