General Settings—Psm - JVC KW-XC410 Instructions Manual

Cd/cassette receiver
Hide thumbs Also See for KW-XC410:
Table of Contents

Advertisement

Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select "CD" or "CD-CH" for
the playback source, disc play starts from
where it has been stopped previously.
Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from
dust. (Disc will not play this time.)
Tape operations
Playing a tape
• While locating a specified tune:
– If the tape is rewound to its beginning,
playback starts from the beginning of that
side.
– If the tape is fast-forwarded to the end, it is
reversed and played from the beginning of
the other side.
• In the following cases, Multi Music Scan
(MMS), Blank Skip, and Repeat Play may not
operate correctly:
– Tapes with tunes having long pianissimo
passages (very quiet parts) or non-recorded
portions.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming
between tunes.
– The Dolby NR setting does not match. For
example, if the tape is recorded with the
Dolby C NR.
• Do not use the following tape:
– Dirty or dusty tapes.
– Cassette with peeling labels.
– Loose tape which may become entangled
with the mechanism.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Changing the source
• If you change the source, playback also stops
(without ejecting the cassette).
Ignition key-off release
• When you turn off the ignition key with
a cassette in the compartment, the unit
automatically releases the tape from its head.
General settings—PSM
• If you change the "TAG DISP" setting from
"TAG OFF" to "TAG ON" while playing
MP3/WMA file, the tag display will be
activated when the next file starts playing.
• If you change the "AMP GAIN" setting
from "HIGH PWR" to "LOW PWR"
while the volume level is set higher than
"VOLUME 30," the unit automatically
changes the volume level to "VOLUME 30."
Other main functions
• If you try to assign a title to the 31st station
frequency, "NAME FULL" flashes. Delete
unwanted titles before assignment.
Satellite radio operations
• You can also connect the JVC SIRIUS radio
PnP (Plug and Play), using the JVC SIRIUS
radio adapter, KS-U100K (not supplied) to the
CD changer jack on the rear.
By turning on the power of the unit, you
can turn on/off the JVC PnP. However, you
cannot control it from this unit.
• To know more about SIRIUS Satellite radio
or to sign up, visit «http://www.sirius.com».
• For the latest channel listings and
programming information, or to sign up
for XM Satellite radio, visit «http://www.
xmradio.com».

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-xc400

Table of Contents