Table of Contents
Advertisement
11
Controls on the system
and remote control
STANDBY ON
–
to switch the system on or to
standby mode.
–
to use for EASY SET.
PROGRAM
for CD ............ to program CD tracks.
for TUNER ... to program preset
radio stations.
for CLOCK .. to select 12- or 24-
hour in clock setting
mode.
DIGITAL SOUND
CONTROL DISPLAY PANEL
–
to view the desired DSC display.
JOG CONTROL/DSC
–
to select the desired equalizer
display: OPTIMAL, JAZZ, ROCK
or TECHNO.
DBB (DYNAMIC BASS
BOOST)
–
to switch on bass boost to
enhance bass response or to
switch off bass boost.
DISPLAY SCREEN
–
to view the current setting of the
system.
CD CAROUSEL TRAY
DISC CHANGE
–
to change CD(s).
OPEN•CLOSE
–
to open or close the CD carousel
tray.
12
C10
FW-
MINI HIFI SYSTEM
STANDBY-ON
JOG
C D 1 • 2 • 3
CONTROL
CD
OPTIMAL
TUNING
JAZZ
SEARCH
PROGRAM
ROCK
TECHNO
Important:
Before you operate the system,
complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode
that shows the various features offered
by the system. When the system is
switched on for the first time, the
demonstration mode will start
automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to
standby mode, the demonstration will
resume five seconds later.
DISC 1 / DISC 2 / DISC 3 (CD
DIRECT PLAY)
–
to select a CD tray for playback.
SOURCE – to select the
following:
CD / (CD 1•2•3)
–
to select CD mode. When CD
playback is stopped, press to select
disc tray 1, 2 or 3.
TUNER / (FM•AM)
–
to select Tuner mode. When in
tuner mode, press to select the
waveband: FM or AM.
TAPE / (TAPE 1• 2)
–
to select Tape mode.
AUX / (VIDEO)
–
to select sound from an external
source (e.g. TV, VCR, Laser Disc
player, DVD player or CD
Recorder).
MODE SELECTION
SEARCH à á (TUNING
à á )
for CD ............ to search backward/
forward.
for TUNER .... to tune to a lower or
higher radio frequency.
for CLOCK .. to set the hour (on
the system only).
STOP•CLEAR Ç
for CD ............ to stop CD playback
or to clear a program.
for TUNER ... to stop programming.
for DEMO .... (on the system only)
to start or stop
demonstration mode.
OPERATING THE SYSTEM
MASTER
FM • AM
TAPE 1 • 2
VIDEO
VOLUME
TUNER
TAPE
AUX
▲
▲
PRESET
STOP• CLEAR
PLAY• PAUSE PREV
NEXT
CLOCK•TIMER
DIM
SOUND NAVIGATION - JOG
To stop the demonstration mode
• Press and hold Ç(on the system
only) for five seconds when the
system is in demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç(on the system
only) for five seconds when the
system is in standby mode.
™ The demonstration will begin.
2-3
CONTROLS
PLAY É / PAUSE Å
for CD ............ to start or interrupt
playback.
PREV í / NEXT ë(PRESET
4 3 )
for CD ............ to skip to the
beginning of the
current, previous, or
next track.
for TUNER ... to select a preset
station in memory.
for CLOCK .. to set the minute (on
the system only).
MASTER VOLUME
–
to increase or decrease the
volume.
–
to connect headphones.
DIM
–
to select different brightness for
the display screen : DIM 1, DIM 2,
DIM 3 or DIM OFF.
CLOCK•TIMER
–
to view the clock, set the clock or
set the timer.
TAPE DECK 2
TAPE DECK 2 OPERATION
PLAYÉ ...... to start playback.
à ..................... to rewind the tape.
á ..................... to fast forward the
tape.
STOP•OPEN...to stop playback
or to open the tape
door.
PAUSE ......... to interrupt playback.
Easy Set
EASY SET allows you to store all
available radio stations automatically.
• Press and hold STANDBY ON (on
the system only) for five seconds
when the system is in standby or
demonstration mode.
™ "EASY SET" will be displayed,
and followed by "TUNER" and
then "AUTO".
™ EASY SET will start searching for
all radio on FM band and then
followed by radio stations on AM
band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
– EASY SET will start with the FM band,
if there are still presets available, the
system will continue to store the AM
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will
appear on the display when EASY SET
is completed.
TAPE DECK 1 OPERATION
RECORD ... to start recording.
PLAYÉ ...... to start playback.
à ..................... to rewind the tape.
á ..................... to fast forward the
tape.
STOP•OPEN...to stop playback/
recording or to open
the tape door.
PAUSE ......... to interrupt playback
or recording.
TAPE DECK 1
REPEAT
–
to repeat a CD track, a disc, or all
available discs.
MUTE
–
to switch off the sound temporarily.
SHUFFLE
–
to play all the available discs and
their tracks in random order.
SLEEP
–
to switch the system to standby
mode at a selected time.
–
to switch the system to standby
mode.
Notes for remote control:
– First select the source you wish
to control by pressing one of the
source select keys on the remote
control (e.g. CD ,TUNER etc.).
– Then select the desired function
( É , í , ë , etc.).
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT
PLAY buttons.
Switching the system to
standby mode
• Press STANDBY ON or
on
the remote control.
™ The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or
AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX IN terminals.
PCS 103 334
Hide quick links:
Advertisement
Chapters
Table of Contents
