Loading The Cd Changer - Philips FW-C30 Service Manual

13
DIM mode
You can select the desired brightness
for the display.
• Press DIM to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
™ The
display lights up.
DIM
™ "DIM 1", "DIM 2", "DIM 3" or
"DIM OFF" will be displayed
depending on the mode selected.
DIM OFF - normal brightness with
Spectrum Analyzer On
DIM 1 - normal brightness with
Spectrum Analyzer Off
DIM 2 - half brightness with
Spectrum Analyzer On
14
DISC CHANGE
C H A N G E R
C10
FW-
MINI HIFI SYSTEM
STANDBY-ON
C D1 • 2 • 3
JOG
CONTROL
CD
OPTIMAL
TUNING
JAZZ
SEARCH
PROGRAM
ROCK
TECHNO
Warning!
1) This system is designed for conventional CDs. Do not use any accessories
such as disc stabilizer rings or CD treatment sheets, etc., which may
damage the CD mechanism.
2) Do not load more than one disc into each tray.
3) When the CD changer is loaded with CDs, do not turn over or shake the
system. This may jam the changer.
You may load three discs in the CD changer for continuous playback
without interruption.
PCS 103 335
OPERATING THE SYSTEM
DIM 3 - half brightness with
Spectrum Analyzer Off and all LEDs
on the system will be switched off.
Sound Control
VOLUME ADJUSTMENT
Adjust MASTER VOLUME to
increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the
socket at the front of the system.
The speakers will be muted.
DISC 1 DISC 2 DISC 3
OPEN • CLOSE
FM •AM TAPE 1 • 2 VIDEO MASTER
VOLUME
TUNER TAPE AUX
▲
▲
PRESET
STOP• CLEAR PLAY• PAUSE PREV NEXT
•
CLOCK TIMER DIM
SOUND NAVIGATION - JOG
2-4
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to enjoy
special sound effects that have preset
equalizer settings, providing the best
music reproduction.
• Adjust JOG CONTROL to select
OPTIMAL, JAZZ, ROCK or
TECHNO.
™ The Digital Sound Control display
panel will light up respectively.
™ "OPTIMAL, JAZZ, ROCK or
TECHNO" and the respective flag
will be displayed.
Note:
– When "OPTIMAL" sound is selected,
DBB will be switched on automatically.
DYNAMIC BASS BOOST (DBB)
The DBB mode enhances the bass
response.
• Press DBB to switch on bass
response.
™ The DBB button lights up.
™ "DBB ON" and the DBB flag will
be displayed.
To switch off DBB
• Press DBB again.
™ The DBB button light is switched
off.
™ "DBB OFF" will be displayed.
CD
Discs for playback
This system can play all digital audio CD,
finalized digital audio CD-Recordable
and finalized digital audio CD-
Rewritable format discs.

Loading the CD Changer

1 Press CD to select CD mode.
2 Press OPEN•CLOSE.
™ The CD carousel tray slides out.
3 Load a CD with the printed side up
in the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the
DISC CHANGE button.
™ The CD carousel tray will rotate
until the empty tray is ready for
loading.
4 Press OPEN•CLOSE to close the
CD carousel tray.
™ The total number of tracks and
the playing time of the selected
disc appear on the display.
Note:
– To ensure good system performance,
wait until the CD changer completely
reads the disc(s) before proceeding.
Note:
– Some CDs or tapes might be recorded
in high modulation, which causes a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.
MUTE (only on remote control)
This feature allows you to temporarily
switch off the sound of the system without
switching off the system when you require
a moment of silence.
• Press MUTE on the remote control
to switch off the sound.
™ "MUTE" and the MUTE flag will be
displayed.
• Press MUTE again on the remote
control or increase the MASTER
VOLUME to switch on the sound.
CD Direct Play
• You can play a CD directly by
pressing the DISC 1, DISC 2 or
DISC 3 button. The CD player will
stop at the end of playback of the
selected disc.
™ A lit button indicates that a disc is
loaded in the disc tray.
™ A flashing button indicates that a
disc is playing.
Playing a CD
1 PressÉ to start playback.
™ The disc tray, track number and
elapsed playing time of the current
track appear on the display.
• To interrupt playback, pressÅ.
™ The playing time flashes.
• To resume playback, pressÉ again.
2 To stop playback, press Ç.
Note:
– All the available discs will play once,
then stop.
Disc Change
You can change the outer two discs
while the third inner disc is stopped or
is playing.
1 Press DISC CHANGE.
™ The CD carousel tray slides out.
2 Replace the discs in the left and right
disc trays.