Changing To Another Paper Size And Printing When Paper Runs Out - Sharp MX-5500N Printer Manual

CHANGING TO ANOTHER PAPER SIZE AND
PRINTING WHEN PAPER RUNS OUT
If printing stops because the machine ran out of paper, or if the size of paper specified in the printer driver is not loaded
in the machine, a message will appear in the touch panel. Printing will begin automatically when the [OK] key is touched
and paper is loaded in the machine. If you wish to print on paper in another tray because the desired size of paper is not
immediately available, follow the steps below.
1
Print Job Scan to
Job Queue
Computer01
2
Detail
Computer01
Data : File-01.tiff
Colour / B/W : Full Colour
3
A3
Paper :
Plain
Detail
Computer01
Paper Select
4
If you changed to a different paper size, printing may not take place correctly; for example part of the text or image may run
off the paper.
JOB STATUS
Fax Job Internet Fax
Sets / Progress Status
Paper Empty
020 / 001
1
1
(1)
(2)
020 / 000 Paper Empty
Document
2-Sided
Style:
(Book)
Paper Select Output :
Special
Modes:
020 / 000 Paper Empty
Bypass Tray
Paper Tray
A4 A4 A4
Plain Plain
A3 Plain
B4
Plain
Press the [JOB STATUS] key.
Display details on the print job for which
there is no paper.
Spool
Job Queue
Complete (1) Touch the key of the job for which "Paper
Empty" appeared.
(2) Touch the [Detail] key.
Detail
Priority
Stop/Delete
Touch the [Paper Select] key.
OK
Touch the key of the tray that has the
OK
paper you wish to use.
Printing begins.
Plain
69