Keystone Button - Sanyo PLC PLC-ET30L Owner's Manual

NO SHOW button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button.
P-TIMER button
Press the P-TIMER button on the remote control. The P-Timer
display "00:00" appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.

KEySTONE button

Press the KEYSTONE button on the remote control. The
"Keystone" appears on the screen.
Use the Point ed buttons to correct keystone distortion.
The keystone adjustment can be stored (see page 45).
Reduce the upper width
with the Point button.
e
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
Reduce the lower width
with the Point button.
d
"No show" disappears after 4 seconds.
P-Timer display
Remote Control
P-TIMER
button
✔ Note:
• See the previous page for the
description of other buttons.
Basic Operation
KEySTONE
button
NO SHOW
button
31