Chapter 4: Operation - Elo TouchSystems 1517L User Manual

Chapter 4: Operation

Power
To turn the touchmonitor on or off, press the touchmonitor power button once.
The Power Status LED on the bottom of the touchmonitor functions according to the following
table:
The system consumes low power when in SLEEP and OFF modes. For detailed power
consumption specifications, refer to the technical specifications available on the Elo website
www.elotouch.com.
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the
mouse or pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the power adapter
when long periods of disuse are planned.
Touch
Your touchmonitor is factory-calibrated and should not need manual calibration (unless the
input video is not fully scaled to the native resolution, or the touch experience needs to be
calibrated to a specific user).
Touchmonitor status
OFF
SLEEP
ON
LED status
OFF
PULSING
ON
User Manual: 1517L, 1717L
SW601708 Rev C, Page 17 of 30