Elo TouchSystems 1517L User Manual page 14

For the 17 inch touchmonitor, a four-hole 75x75mm mounting pattern for M4 screws is provided
on the rear of the monitor. Remove the stand using a Phillips screwdriver to access this
mounting interface. The VESA FDMI-compliant counting is coded: VESA MIS-B, 75, C.
An optional filler plate is available for purchase separately to use with the VESA mount:
E000405 (Black)
E000421 (White)
User Manual: 1517L, 1717L
SW601708 Rev C, Page 14 of 30