Lenovo ThinkServer TS130 1098 Hardware Maintenance Manual page 97

Table 42. Items under the Startup menu
Item
Primary Boot Sequence
Automatic Boot Sequence
Error Boot Sequence
Boot Mode
Quick Boot
Boot Up Num-Lock Status
Keyboardless Operation
Option Keys Display
Option
[Auto] / UEFI / Legacy
[Enabled] / Disabled
[On] / Off
Enabled / [Disabled]
[Enabled] / Disabled
Description
This sequence is used when the
system starts normally. Press the
Up and Down arrow keys to select a
device.
This sequence is used when a
communication device wakes the
system up. Press the Up and Down
arrow keys to select a device.
This sequence is used when the
BIOS determines that an error has
occurred. Press the Up and Down
arrow keys to select a device.
Choose boot policy:
• Auto: The system will prioritize
boot options in bootable devices
by running UEFI boot options first
and then processing Legacy boot
options.
• UEFI: The system will boot from
UEFI bootable devices only.
• Legacy: The system will boot from
Legacy bootable devices only.
Select Enabled to obtain the fastest
boot time. Select Disabled to test
for a stuck key during the POST and
you may hear a beep after POST
completes.
This field indicates the state of the
NumLock feature of the keyboard
after startup.
• If NumLock is On, the keys on the
keyboard will act as numeric keys.
• If NumLock is Off, the keys on the
keyboard will act as cursor keys.
Enable or disable the keyboardless
operation. This function enables
the system to function without a
keyboard. It is commonly used when
the system has been set up as a
network server.
Note: If it is enabled, systems without
keyboards will not display keyboard
errors during the POST.
Enable or disable the Option Keys
Display function. When this function
is enabled, the system software
option key (such as the F1 key)
prompts will be displayed.
Note: Disabling the prompts will not
affect the function of a specific key.
.
Chapter 7 Configuring the server
93