Lenovo ThinkServer TS130 1098 Hardware Maintenance Manual page 38

To install or replace a PCI card, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See "Removing the server cover" on page 31.
3. At the rear of the server, press the release button
Figure 8. Opening the PCI card latch
34
ThinkServer TS130 Hardware Maintenance Manual
1 to open the PCI card latch 2 .