Removing And Reinstalling The Front Bezel - Lenovo ThinkServer TS130 1098 Hardware Maintenance Manual

Machine types: 1098, 1100, 1105, and 1106
Hide thumbs Also See for ThinkServer TS130 1098:
Table of Contents

Advertisement

Removing and reinstalling the front bezel

Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the documentation DVD that came with your product, and "Guidelines" on page
27. To obtain a copy of the publications, go to:
http://support.lenovo.com
This section provides instructions on how to remove and reinstall the front bezel.
To remove and reinstall the front bezel, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See "Removing the server cover" on page 31.
3. Remove the front bezel by releasing the three plastic tabs on the left side and pivoting the front bezel
outward.
Figure 6. Removing the front bezel
32
ThinkServer TS130 Hardware Maintenance Manual

Advertisement

Table of Contents
loading

Table of Contents