Daikin VAM-GVJU Manual page 28

EDUS711116
8-4 How to install the optional Adapter PCB
(KRP4A72, KRP50-2)
<VAM300GVJU, VAM470GVJU, VAM600GVJU>
• When installing the optional adaptor PCB, it is necessary to
prepare the fixing box (KRP50-2A90)
1. Open the control box cover by following the procedure
described in the "8-2" <OPENING THE CONTROL
BOX> section.
2. Remove the screws and install the adapter PCB.
3. After wiring, fasten the control box cover.
KRP50-2A90
components
See the right for components.
Installation
1. Fixing board
2. PCB support
(Attached to adapter PCB) 5. Control box
Applicable adapter name
A Adapter PCB for Humidifier
B Adapter PCB for remote control
<VAM1200GVJU>
• When installing the optional adaptor PCB, it is necessary to
prepare the fixing box (KRP50-2A90)
1. Open the control box cover by following the procedure
described in the "8-2" <OPENING THE CONTROL
BOX> section.
2. Remove the screws and install the adapter PCB.
3. After wiring, fasten the control box cover.
• The adapter circuit board (KRP50-2) can be installed on the
inner right-hand side of the control box.
The attachment box (optional accessory) is not required.
English
VAM-GVJU
Fixing Screw 3 pcs.
Clamp 2 pcs.
3. Fixing screw
4. Cover
Kit name Fixing box
KRP50-2 KRP50-2A90
KRP4A72 KRP50-2A90
KRP50-2A90
components
See the right for components.
Installation
1
3
2
B
4
3
1. Fixing board 3. Fixing screw
2. PCB support 4. Cover
(Attached to adapter PCB) 5. Control box
Applicable adapter name
A Adapter PCB for Humidifier
B Adapter PCB for remote control
Installation Manual
Fixing Screw 3 pcs.
Clamp 2 pcs.
A
2
5
Kit name Fixing box
KRP50-2
KRP4A72 KRP50-2A90
12
3P034928-7Q
27