Saving A Song - Korg PA900 Quick Manual

Saving a Song

After having recorded a Song that you like, it is a good idea to save it, to avoid losing it when the
instrument is turned off (or put in standby).
1
While in the main page of the Sequencer mode, touch the page menu icon to open the
page menu.
2
Select the Save Song command to open the Save Song window.
This window is very similar to the one you can see when pressing the MEDIA button on the con-
trol panel, and touch the Save tab to see the Save page. This page is, however, "filtered" to only
see Song files.
3
Select a device and folder where you want to save your Song.
If a Song is selected (highlighted) it
will be overwritten. If no Song is
selected, a new Song file will be cre-
ated on the target device.
To deselect a selected Song, touch
anywhere else in the Song list, or
select the same storage device
again.
Use the Device pop-up menu to select one of
the available storage devices
Recording a new Song (Standard MIDI File)
After you select the Save song
command, the Save Song page
appears.
Use the Open and Close buttons to
browse through the folders.
Saving a Song
Use the scroll bar to see all Songs in the
list. Keep SHIFT pressed and touch the
Up/Down arrow to scroll to the next/pre-
vious alphabetic section. As an alterna-
tive, you can use the VALUE DIAL.
Touch the Save button to save the Song to
the current folder.
In case you prefer to exit
this page without saving
the Song, press the EXIT
button.
91