Adjusting The Volume - Intermec 1011CM01 User Manual

Adjusting the Volume

CV61 Vehicle Mount Computer (Windows 7) User Guide
Use the following table to learn about the indicator default status. For
further customization, you can enable or disable the Ready-to-Work
indicator in Intermec Settings. For more information, see
Intermec Settings" on page
Ready-to-Work Indicator Status
LED
On
Blinking
Off
You can change the CV61 volume, for sounds you hear when you tap
the screen or scan bar codes with a scanner.
1 Tap the speaker icon in the taskbar.
2 Move the speaker slider up or down, or tap the speaker icon in the
slider to turn the volume on or off.
Chapter 1 — About the Vehicle Mount Computer
33.
Description
The CV61 is powered on.
The indicator blinks when:
•
the CV61 is in state maintenance mode.
•
DC power is disconnected.
•
attempting to boot at -20 °C (-4 °F) or below.
The CV61 is off.
"Start
9