Table of Contents
Advertisement
After activation, all graphical display elements are turned ON, and the backlight and
the beep are activated. After this, the selected altitude and personal settings are dis-
played, as well as the RGBM and Deep Stop status. A few seconds later the battery
power indicator is shown.
At this time, perform your pre-checks, and ensure that:
the instrument operates in the correct mode and provides a complete display
•
(AIR/NITROX/GAUGE mode)
the battery level is ok.
•
the altitude, personal adjustment, Deep stops, and RGBM settings are correct.
•
the instrument displays correct units of measurement (Metric/Imperial).
•
the instrument displays the correct temperature and depth (0.0 m/0 ft).
•
•
the alarm beeps
If the optional wireless pressure transmitter is used ensure that:
the pressure transmitter has been properly attached and the cylinder valve is open
•
the transmitter and the wrist unit have been properly paired on a suitable code
•
the pressure transmitter is working (wireless transmitter indicator blinks, cylinder
•
pressure is displayed), and that there is no low battery warning displayed
53
Hide quick links:
Advertisement
Table of Contents
