Setting The Personal/Altitude Adjustments; Setting The Sample Rate - Suunto D6 User Manual

5.8.4. Setting the personal/altitude adjustments

The current Altitude and Personal Adjustment settings are displayed in the startup
screen when entering the DIVE mode. If the mode does not match the altitude or
personal conditions (see Section 5.9.4. Diving at altitude and Section 5.9.5. Personal
adjustments), it is imperative that you enter the correct selection before diving. Use
Altitude Adjustment to select the correct altitude and use Personal Adjustment to add
an extra level of conservatism.

5.8.5. Setting the sample rate

The sample rate controls how often the depth, time, and water temperature is stored
in the memory. You can set the dive profile sample rate to 1, 10, 20, 30, or 60 seconds.
The factory default setting is 20 seconds.
44
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.