Before Operating; To Set The Clock; Timer; Stop/Clear - Thermador MD24JS Use And Care Manual

Before Operating

Before operating your new MicroDrawer™ make sure you
read and understand this operation manual completely.
• Before the MicroDrawer™ can be used, follow these steps:
1 Plug in the MicroDrawer™.
WAVE TOUCH CLEAR
appear.
2 Touch the STOP/CLEAR pad.
3 Set clock.

TO SET THE CLOCK

1 Touch TIMER/CLOCK pad and number
2 Touch number pads for correct time of day and touch
TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time, will appear in the display. Touch the
ERROR
CLEAR pad and re-enter the time.
STOP/
• If the electrical power supply to your MicroDrawer™
should be interrupted, the display will intermittently
show
ENJOY YOUR
AND TOUCH CLOCK
this occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch
CLEAR pad and reset the clock for the correct
STOP/
time of day.
Note:
• The MicroDrawer™ can be programmed with the drawer
open except for START (+1 min)
ENJOY YOUR MICRO-
AND TOUCH CLOCK
will appear.
:
.
2
MICRO-
WAVE TOUCH CLEAR
after the power is reinstated. If

TIMER

1 Touch TIMER/CLOCK pad and number
2 Enter time.
3 Touch TIMER/CLOCK pad again.
will
To cancel timer, touch STOP/

STOP/CLEAR

Touch the
STOP/
• Erase if you make a mistake during programming.
• Cancel timer.
• Stop the MicroDrawer™ temporarily during timed cooking.
• Return the time of day to the display.
• Cancel a program during cooking, touch twice for timed
cooking.

OPEN OR CLOSE MICRODRAWER™

Always press the OPEN or CLOSE key on the control
panel to open or close the drawer.
Do not push or pull the drawer by hand, except in case of
emergency, such as during a power failure. If necessary,
push or pull slowly.
1
CLEAR
.
CLEAR pad to:
.
English 9