Important Safety Instructions; Installation; Before You Begin; Tools And Parts Needed - Thermador WD24 Installation Instructions Manual

Important Safety Instructions

Save these Instructions

Installation

Before You Begin

Tools and Parts Needed

Parts Included

Be sure your appliance is properly installed and grounded by a qualified
technician in accordance with the National Electrical Code ANSI/NFPA No. 7 lat-
est edition (or the Canadian Electric Code) and local electrical code requirements.
Important: Local codes vary. Installation, electrical connections and grounding
must comply with all applicable codes.
Never use your appliance for warming or heating a room.
Children should not be left alone or unattended in area where appliance is in use.
Do not allow children to sit or stand on any part of the appliance.
Do not repair or replace any part of the appliance unless specifically recom-
mended in the manual. All other servicing should be referred to a qualified techni-
cian.
Flammable materials should not be stored in the appliance.
• Saw
• Phillips Head Screwdriver
• Measuring Tape
• Screws, 8 x 5/8" (5.9mm) (8)
• Support Brackets (2)Warming Drawer Dimensions
English 1