Control Systems - Haier HSU-14HR03/R2 Technical Data Manual

12 Control systems

Buttons and display of the remote controller.
If the unit which you purchased has not health function, remote controller should
like the following figure:
25. SET
Used to confirm timer and clock settings
26. HOUR
Used to set clock and timer settings
27.LOCK
Used to lock buttons and LCD display.
NOTE:(1)The following functions and related displays are not available: AUXILIARY HEAT display, POWER/SOFT display,HEALTH display.
(2)If the Air conditioner don't have the function of the code ,press code B can cause it not available.
(3)Cooling only unit do not have functions and displays related with heating.
Clock set
When unit is started for the first time and after replacing batteries in remote controller, clock should
be adjusted as follows:
Press CLOCK button, "AM" or "PM" flashes.
Press or to set correct time. Each press will increase or decrease 1min. If the button is kept
depressed, time will change quickly.
After time setting is confirmed, press SET, "AM "and "PM" stop flashing, while clock starts working.
Hints
After replacing with new batteries, remote controller will conduct self-check, displaying
all information on LCD. Then, it will become normal.
HSU-14HR03/R2 HSU-18HR03/R2
1.Mode display
2. SWING display
3. FAN SPEED display
4. HEALTH display
5. SLEEP display
6. LOCK display
7. TIMER ON display
8. AUXILIARY HEAT display
9. SWING
10. MODE
11. CLOCK
12. TIMER
13. RESET
14. CODE
15. CODE display
16. SIGNAL SENDING display
17. POWER/SOFT display
18. TEMP. display
19. CLOCK display
20. TIMER OFF display
21. TEMP
22. FAN
23. POWER ON/OFF
24. SLEEP
20
AUTO
COOL
DRY
HEAT
FAN
AUTO
Used to select AUTO,COOL
and FAN
Used to set correct time
Used to select TIMER ON,TIMER OFF
Used to reset the controller back to
normal condition.
Used to select code A or B with a press,A
or B will be displayed on LCD.please
select A without special explanation
Used to select your desired temperature
Used to select fan speed
Used for unit start or stop
Used to select sleep mode
Control systems
MED HI
LO
Domestic air conditioner