Advanced Chipset Features - ECS PN1 SLI2 Extreme User Manual

Motherboard

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

If you have installed password protection, this item defines if the password is

required at system start up, or if it is only required when a user tries to enter the

Setup Utility.

APIC Mode (Enabled)

This item allows you to enable or disable the APIC (Advanced Programmable

Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP) for

systems, allowing support for up to 60 processors.

MPS Version Control For OS (1.4)

This item shows MPS version control for OS.

OS Select For DRAM > 64MB (Non-OS2)

This item is only required if you have installed more than 64 MB of memory and

you are running the OS/2 operating system. Otherwise, leave this item at the

default.

Small Logo (EPA) Show (Disabled)

This item enables or disables the display of the EPA logo during boot.

3-8

3.3-3 Advanced Chipset Features

These items define critical timing parameters of the mainboard. You should

leave the items on this page at their default values unless you are very

familiar with the technical specifications of your system hardware. If you

change the values incorrectly, this may cause fatal errors or instability into

your system.

Phoenix-AwardBIOS CMOS Setup Utility