5.11 Clock Mode; Setting The Time; 5.12 Chronometer Mode - Midland Handheld VHF Marine Transceiver User Manual

5.11 Clock mode

This mode allows the user to see the current time on the LCD display. To activate this, briefly press the CLOCK button.
5.11.a

Setting the time

1) In clock mode, briefly press the
2) Press the or
3) Briefly press the
4) Press the or
5) Briefly press the
6) Press the or
7) Briefly press the
8) To exit the clock mode, briefly press the CLOCK button.
While in this mode, you can still transmit normally using the CALL or PTT buttons. When this happens, the LCD display will
automatically switch to its regular operating screen, returning to clock mode as soon as transmission is terminated.

5.12 Chronometer mode

This function activates the use of your transceiver's built-in chronometer (values to the hundredths of a second). To
activate this:
1) Press the STW (Stop Watch) button: StopWatch and 00
2) To activate the chronometer, press the
•
View the elapsed time, by pressing the
•
Stop the chronometer by pressing the
button again. Or else press the
3) To exit the chronometer function, press the STW button again.
When the chronometer function is active, Ocean is still able to receive calls, but the display will continue to show the
chronometer's progress. When this happens, you can transmit normally using the CALL or PTT buttons, or using VOX mode. The
display will switch to the regular operating screen, but will continue to clock the chronometer's progress. To return to the screen
after terminating transmission, press the STW button again.
When the chronometer function is active, if you press the CALL button to send a call, the radio will show the main screen during
the call but will continue to clock the chronometer's progress, which will appear on the display immediately afterwards.
button. The hour will begin to flash on the LCD display.
buttons to change the hour.
button again. The minutes will begin to flash on the LCD display.
buttons to change the minutes.
button again. The seconds will begin to flash on the LCD display.
buttons to change the seconds.
button to set the time and return to clock mode.
button. At this point, you can:
button. To exit the elapsed time viewing, press the
button. To reactivate the chronometer from its stopping point, press the
button if you wish to restart the chronometer at 00
:00:00
will appear on the display.
Page 14 of 24
button again.
:00:00
.