Receiving Ctcss (R-Ctcss) - Menu No.11 - Midland CT690 User Manual

You can choose amongst:
OFF: OFF
R-DCS: D023N-D754N (Normal DCS)
R-DCS: D023I-D754I (Inverse DCS)
Note: In CT690 there are 208 groups of normal and inverse DCS codes. This
function cannot be used in channel mode.

Receiving CTCSS (R-CTCSS) - MENU No.11

As DCS codes, the CTCSS codes can be added to the channels for creating
new private channels.
Note: there are 50 groups of CTCSS tones. In channel mode the CTCSS tones
cannot be enabled.
Transmitting DCS - (T-DCS) - MENU No.12
In this Menu you activate a DCS code in tx mode.
Note: the groups of DCS codes are 208. DCS codes cannot be set in channel
mode.
Transmitting CTCSS (T-CTCSS) - MENU No.13
In this Menu you can set a CTCSS tone in tx mode.
You can choose: OFF or CTCSS (67.0 to 254.1 Hz)
Note: there are 50 groups of CTCSS tones. In channel mode the CTCSS tones
cannot be enabled.
Voice function (VOICE) - MENU No. 14
With this function, you activate a voice that informs you about any operation/
selection you are doing.
ANI-ID (ANI-ID) - MENU No.15
With this function you can set your ID-code. It can be programmed by the
proper programming software. You can edit up to 5 digits.
DTMFST (DTMFST) - MENU No.16
Thanks to the DTMF , while you are transmitting, the receiver can hear the
DTMF and ANI-ID code.
You can choose amongst the following options:
CT690 user's manual | 17