Table of Contents
Advertisement
www.aeg.com
8
4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".
4.2 Setting the time
After the first connection to the mains,
all symbols in the display are on for
some seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows
flashes.
1.
Press
hour.
2.
Press
for the first setting. Later the new
5. DAILY USE
WARNING!
Refer to the Safety chapters.
To use the appliance, press the control
knob. The control knob comes out.
5.1 Activating and
deactivating the appliance
1.
Turn the knob for the oven functions
to select an oven function.
2.
Turn the knob for the temperature
/
3.
To deactivate the appliance, turn the
knob for the oven functions to the
off position ("0") .
and "12:00". "12"
or
to set the current
to confirm (necessary only
to set a temperature.
time will be saved automatically after
5 seconds).
The display shows
hour. "00" flashes.
3.
Press
or
to set the current mi-
nutes.
4.
Press
to confirm (necessary only
for the first setting. Later the new
time will be saved automatically after
5 seconds) .
The Temperature / Time display
shows the new time.
Changing the time of day
You can change the time of day only if
the oven is off.
Press
. The set time and symbol
flash in the display. To set a new time,
use the procedure "Setting the time".
Knob symbol, indicator or lamp
(depends on the model - refer
to the product description):
• The indicator comes on when
the oven heats up.
• The lamp comes on when the
appliance operates.
• The symbol shows whether the
knob controls one of the cook-
ing zones, the oven functions
or the temperature.
and the set
Hide quick links:
Advertisement
Table of Contents
